If you are interested in purchasing, we would need to examine your water test results and discuss your specific needs to ensure you got the most appropriate size model.

Vessel Size: 1252

In/Out Connection 3/4"

Flow rate, ( 1.8 m3-2.5 m3 ): 40 LPM

Filter Media Volume: 57 ltr

The reagent-free water filter system FE-MiX-O3 is used to remove iron (max 20-30 mg / l) and manganese (max 3.0 mg / l)

A unique multifunctional automatic backwash filter that will reduce iron, manganese, hydrogen sulphide and a wide spectrum of other heavy and non-ferrous metals dissolved in water, inc: ammonium, turbidity (sediment) and some water hardness, while FE-MiX-O3 with Ozone is chemical free and does not use reagents and after installation requiring no maintenance for approximately 8-12 years!

How Does Ozone Water Purification Work?

Ozone is composed of three Oxygen atoms. One of the atoms is connected to the others weakly and will transfer itself to other substances such as iron and organic bacteria, causing them to oxidize by binding itself onto them. Ozone water purification accounts for more than 90% of the world's purified water and most bottled waters are treated by ozone.

Ozone is a unique oxidation treatment method that uses natural ozone built by the ambient air around the system. It disinfects at a much higher level than chlorine, peroxides and other man made chemicals and leaves no DBP’s (disinfection by-products). Ozone simply breaks down back into oxygen once it has completed its sanitizing work so all you’re left with is a completely oxygen rich purified water.

 FE-MiX-O3 with Ozone will reduce all these contaminates from your water supply

Iron - Manganese - Hydrogen Sulphide - Cobalt - Zinc - Cadmium - Nickel - Lead - Mercury – Turbidity (Sediment) - Partial water hardness (< 40%) - Increase РН - Radionuclides - Oil products - Ammonia & many others..

FE-MiX-O3 with Ozone is manufactured in the EU,

Low purchase and operating cost

Energy demand just 2-3 kW less than £1 per year!, being a very economical filtration system in service

FE-MiX-O3 with Ozone is very simple and consists of a vessel with media, an automatic valve and a small Ozone controller unit, which at the command of the automatic valve, periodically regenerates and restores the active properties of the filter media.

FE-MIX-O3 with Ozone does not pollute the environment with chemical reagents, being a filter with zero discharge of chemical reagents, with minimal environmental impact.

FE-MiX-O3 with Ozone is very economic with water to backwash the filter by using a revolutionary super lightweight media which does not overload your pump, also allowing you to save even more water because the cycle between regenerations is longer.

Filtration of a wide spectrum of contaminants without the use of reagents!

Automatic and fully autonomous use for at least 8-12 years!

Work with a wide range of water PH, starting from 6.3 with increasing pH of purified water!

Electricity & water saving!

The ability to simultaneously filter out upto 30 mg / litre of dissolved iron, up to 3 mg / litre of dissolved manganese, a significant amount of dissolved and heavy metals dissolved in water (Fe, Mn, Cu, Cd, Co, Ni, Hg, Pb, Zn and etc), some radionuclides, oil products, hydrogen sulphide and up to 30% of hardness salts without the use of reagents !!!

FE-MiX-O3 with Ozone is one of our most promising water filters that have no equals to date with other manufacturers, we offer you our free advice on choosing the best filter option size based on your water analysis and other technical requirements.

All we need to know is what water consumption per day / month? and peak water consumption per hour and your water test analysis?

The BEST combination of multi purpose, price and quality! It's the BEST Iron Removal choice!!!

Aqua Klenze FE-MiX-O3 tests with water PH <7:

WATER RINSE SYSTEM REQUIREMENTS

The inlet water pressure must be at least 3.5 bar for the FE-MiX-O3 with Ozone system to backwash Ozone is only used during the backwash cycle.

Technical data