SMARTMiX-AS

Aluminosilicate sorbent for removing iron and manganese heavy metals and sediment.

Description

It was developed and used for the purification of any type of water (drinking, industrial, circulating, waste) from a huge range of contaminants, including iron, manganese. SmartMix AS - a catalytic aluminosilicate sorbent for physicochemical water purification. 

It is used to remove a wide range of contaminants, including: Sediment, iron, manganese, chromium, strontium, barium, heavy non-ferrous metals, aluminium, oil products, phenol, fluoride, copper, Nickel, radionuclides.

 Sorbent AS is recommended for use in both pressure and non-pressure systems, as the main or multilayer element of the loading layer. Especially effective when combined with SMARTMiX-MS 

SMARTMiX-AS

Layer height 40 - 100 cm

Filtration rate 10-20 m h /

Washing speed of the AS during expansion by 30-35% 18-20 m h /

Flushing speed АS + МS with expansion by 30-35% 35 m h /

Backwash duration 10-15 min

The SMARTMiX-AS does not require the use of any chemical reagents for regeneration. Periodic flushing with water or water-air flushing (which is more effective) is necessary and sufficient. 

 SMARTMiX-AS is not consumed during operation, it is a very durable material. The SMARTMiX-AS is not additionally treated with chemically active coatings based on manganese or other catalytically active metal, which excludes the possibility of failure in operation when these surfaces are exhausted or washed off. This is one of the fundamental differences between the sorbent and the loads such as BIRM, Greensand, MZhF, black sands, etc.

ADVANTAGES 

Long service life up to 10 years;

Does not require oxidants for regeneration, but works with all types of oxidizers – oxygen, ozone, sodium hypochlorite, etc

Resistant to pre-chlorination of water;

The presence of hydrogen sulfide does not reduce the loading performance;

Due to its large capacity, it is able to retain high concentrations of iron and thereby extend the service life of ion exchange resins;

Retains iron in concentrations up to 30 mg / l, incl. bivalent, trivalent, organic, bacterial and colloidal;

Effectively removes manganese up to mg / l and aluminum;

works at low pH. Works at pH = 6.5

The dirt holding capacity is on average 3-5 times higher than that of sand filters

No running costs.

Packaging:

- packaging volume: 25 l;

- packaging weight: 14 kg.

Important: Before use, soak for 12-24 hours and then rinse.