100 GPD Reverse Osmosis Pumped System with LCD

Brand: Direct Water Filters
Product Code: RO100-LCD
Availability: In Stock
Ex Tax: £157.92

  Free Mainland UK Shipping On Orders Over £30
  Discounted rates for Highlands & Islands, International

  Secure Payment PCI DSS Compliant 
  100% secure payments - Paypal & Braintree 

  30 Days No Quibble Returns
  Return any unused items for full product refund

100 GPD Reverse osmosis water system with LCD controller and automatic membrane flushing. 

Comes with 3.2GAL storage tank

Drinking water quality.
Operated via LCD display that shows when membranes (filters) should be replaced, Water temperature, PPM reading and the opportunity to auto flush the system through the LCD display. 
It comes with a Leak system detector that can be placed where you want it.
These RO units are ideal for under sink drinking water, aquariums, small café, food preparation, hydroponics.

Please note: The pump, membranes and other parts are intended for domestic use and not intended for continual heavy duty use, 

 System's Futures:
1. Pump 80 Psi 
2.  Metal Bracket with stand
3. Automatic Flushing
4. Solenoid valve system
5. Membranes 1x 100GPD
6. Storage tank
1. 10-inch 5-micron PP filter
2. 10-inch carbon block CTO filter
3. 10-inch 1-micron PP filter
4. 100 GPD RO membrane
5. Active carbon post filter
6. Mineral filter

Reverse osmosis is a method of purifying water by pushing it through a semi-permeable membrane, the membrane allows pure water molecules through it, whilst impurities are flushed away. By using reverse osmosis, it is possible to remove all suspended solids, up to 98% of dissolved solids and virtually all bacteria, pesticides and viruses. Reverse osmosis has many benefits.
At the heart of any reverse osmosis system is the membrane, water is forced under pressure through the membrane to a storage tank and the waste by-product goes to drain. In addition to the membrane reverse osmosis unit also incorporates pre-filters. Because filtered RO water is produced very slowly it is necessary to store the treated water in a tank or container to supply filtered RO water as and when it is required.
Reverse osmosis units do require a minimum water pressure of 2.7 bar/40psi - so it is essential you have your source water pressure assessed before purchasing the unit.
This RO system will remove up to 99% of tap water contaminants.

Typical removal rates (%)

Sodium (99%), Calcium (99%), Magnesium (99%), Potassium (98%), Iron (99%), Manganese (99%), Aluminium (99%), Ammonium (97%), Copper (99%), Nickel (99%), Zinc (99%), Cadmium (99%), Silver (98%), Mercury (98%), Barium (99%), Chromium (99%), Lead (99%), Chloride (99%), Bicarbonate (98%), Nitrate (97%), Fluoride (98%), Silicate (98%), Phosphate (99%), Chromate (99%), Cyanide (95%), Sulphate (99%), Bromide (98%), Arsenic (99%), Selenium (99%), Bacteria (99%), Protozoa (99%), Amoebic Cysts (99%), Giardia (99%), Asbestos (99%), Oestrogen (99%), Sediment / Turbidity (99%)

Important information to consider prior to ordering.

Our Reverse Osmosis Systems are shipped fully assembled complete with a comprehensive instruction manual for easy DIY installation with no plumbing experience required.
The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your source water pressure and temperature.

Write a review

Please login or register to review